MICRODUCT

Coupler & End cap

Description

KNET's complete array of accessories to fulfill your fiber pathway.

Coupler & End Cap 

The coupler is used for quick and easy splicing connection of microducts. The body is transparent to allow a visual inspection of micro cable passing through during installation. The coupler is available from 5//3.5mm to 20/16mm mm ducts and any other sizes according to customers’ demands.
Microduct end-stop cap is used for permanent or temporarily sealing of unused microducts to prevent water and dust getting into the duct.
 

Direct Buried Coupler 



The coupler with cover is the effective solution for direct buried application.
The cover provides the protection from external impact and safety locks to prevent the accidental opening during installation 


Gas Block Coupler

Gas block microduct connectors normally are used between indoor and outdoor environments to prevent moisture that may result in condensed water getting into the ducts. After cable installation, the connector can be gas sealed by pushing the connector ends together. This version is intended for 7mm to 18mm thick walled ducts.

Transition Coupler
The reducer enables the connection fast and easily between the different size microducts. Simply push the
microduct into the center of the transition coupler.
No tools are required

Available size 
Straignt Coupler 

5/3.5,7/3.5,8/6,10/8,12/10,14/10,14/12,16/12,16/14,18/14 mm
End cap 
5,7,8,10,12,14,16,18mm 
Gas Block 
7,10,12,14mm 
Transition Coupler
5/3.5-3/2.1, 7/3.5-5/3.5, 12/10-10/8,14/10-12/10,16/12-12/10mm 
** Size : customized upon the request. 

Download Data Sheet